Cold Steel knives 1,142 items

Cold Steel 43LS Urban Pal Knife. It's called the Urban Pal and comes with a half serrated edge to its blade. When you need a finger-knife, this is it – it's absolutely brilliant! In its protective sheath, it can be carried just about anywhere on the body – around the neck or belt line, even back pack or purse. The blade is 1.85 inches long and overall length is three inches. The blade is made in Japan and the handle has a cushioned scales on it to secure a better grip. Hard Kydex sheath with a key ring.

The Cold Steel Sure Balance Thrower 80TSB is not for the faint hearted. This heavy duty knife cannot be tamed, so handle with caution. The construction of it is made from 1055 carbon steel, with a black coating. This allows you to use it in the wettest of environments without worrying about causing it any harm or damage.

Cold Steel 97BWM12S BOWIE MACHETE. Hard black handle. Enclosed in black sheath.

Cold Steel 80STRB PRO BALANCE SPORT. Blade length 3.75 inches. Width 1.63 inches. Hard black handle.

This is the original Cold Steel Kukri Machette, the 97KMS. Kukri's can be found throughout several countries worldwide during historical era's, from Nepal, India and even used by the Gurkha's.

Cold Steel 1917 Frontier Bowie CS88CSAB. This mini sword-like knife is made from 1055 Carbon Steel. The over all length is 17.625 inches. The blade is 12.25 inches long and .25 inches thick. The handle is Rosewood and is 4.625 inches long. This knife comes with a leather fitting sheath.

Cold Steel Special Forces Shovel 19 CS92SF. This is the Cold Steel 92SF Special Forces shovel. With a design based on the original Spetsnaz shovel – a tried and tested design. The soviet Spetznaz soldiers are renowned for being the best in their field.

Cold Steel SC80TBP SURE BALANCE SHEATH ONLY. Black sheath. 13.75 inches long and 3.63 inches wide.

Cold Steel 97KMIGS ROYAL KUKRI MACHETE. Machete comes enclosed in black sheath.

Cold Steel 97JMS JUNGLE MACHETE. Hard black handle. Comes enclosed in black sheath.

Cold Steel 97DRMS CUTLASS MACHETE. Hard black handle. Enclosed in black sheath.

The Cold Steel CS92FPB is a fantastic lightweight knife that can be worn anywhere on you and no one would ever know. No matter if if is wet, cold, sunny or hot this knife works well in any conditions it is placed in, as this knifes main priority if to please.

The Cold Steel FGX Push Blade I 92FPA is so lightweight you will forget you even have it on you. Features a 3.5” blade that is 6.5mm thick and the handle has molded Kraton grip to provide a more secure grip.

Cold Steel Norse Hawk CS90N. The Norse Hawk Axe From Cold Steel, model number 90N. Inspired by old time Viking Norse axe weapons, tomahawks and the rest, this is a great product. Pure strength, unadulterated grit, it means business.

A master hunter knife like no other. This special knife is the “Cold Steel CS36JSK Master Hunter”. It has a 4.5 inch blade crafted using VG-1 San Mai III stainless steel, flat ground to a razor sharpness to give perfect cutting dimensions and ability.

This is the Cold Steel Ti-Lite 26SP knife. It's a lower priced Ti-Lite for those who enjoy the idea of owning a Ti-Lite but find them a little too expensive. The blade on this locking knife is 4 inches long, and made from 440A grade stainless steel which is sub-zero quenched before being precision ground.

The Cold Steel 20RBC Roach Belly has a 4 1/2 blade that is made out of 4116 Krupp stainless steel, and teamed up with a polypropylene handle, which means this knife works well in any conditions, especially when wet.

The Cold Steel 20PC has a 4 blade that is made out of 4116 Krupp stainless steel, 2.5mm thick with a Rockwell hardness of 56-57. The blade has a straight point which is perfect for piercing, and a long belly for skinning, cutting, and carving.

Cold Steel 20MT Mini Tuff Lite Plain Edge Knife. Hard plastic handle. Round hole blade measuring 1.38 inches. Framelock style closing. Pocketclip on back. Ring hole on handle.

Cold Steel 20LT Tuff Lite Plain Edge Knife. Black handle 3.75 inches and blade 2.5 inches. Straight blade edge with rounded top. Liner lock.

Here we present to you the Cold Steel 20CBL Canadian Belt Knife. It's roots come from a 1950's design, classic in it's time. Set to become a favorite, as the original did when it won awards for it's features.

If you own a Cold Steel special forces 92SF knife/tool then it make sense to always have a spare sheath. This is the Cold Steel SC92SF, and we always advocate carrying a second sheath.

These are the Mini Broad head pack of 50 blow gun darts from Cold Steel, model number B625M, suited to the 0.625 caliber magnum blow gun from Cold Steel, a truly effective silent and deadly weapon.

Cold Steel Bamboo .625 Darts (50 Pack) CSB625BB. These are the Cold Steel Bamboo darts, model number B625BB. A pack of 50 deadly bamboo darts, suited for the 0.625 caliber big bore magnum blow gun from Cold Steel.

Cold Steel Trail Boss CS90TA. This is the Cold Steel Trail Boss 90TA. With a name like that it wants you to know it is the leader. It's 23 inches long overall, well balanced and weighs 41.5oz.

Cold Steel San Mai Trail Master 16JSM. This is the Cold Steel San Mai Trail Master, and it's ready for action! It 14 1/2 inches overall and features a 9 1/2 inches VG-1 San Mai III steel bowie blade. It also has a black checkered Kraton handle with stainless guard and lanyard hole.

Cold Steel 53NHS Tokyo Spike Knife. Black textured and grooved handle. Blade measures 4 inches. Enclosed in hard black sheath. Bead necklace included.

Cold Steel 20T Tanto Lite Knife. Black textured handle. Tanto blade measures 5.88 inches. Comes enclosed in black sheath.

Here we give you the Cold Steel OSS 39LSSC knife. A fighting knife offering the benefits of a custom designed knife at a fraction of the price they would cost you.

The Cold Steel OSI/Japanese 39LSSS knife is a fighting knife that will always come out on top. It is no lightweight and really needs to be held in an experts hand as it could cause some damage if not.

This is the Cold Steel Mini Pal 43NSK. This is one of Cold Steel's lightest knives at just 0.5z in weight! This Mini-Pal offers heavyweight endurance and persistent performance. Utilizing 400 series stainless steel for the razor sharp 1 inch blade with a serrated edge, it cuts effortlessly through a variety of materials.

Cold Steel 49NDE Hide Out Knife. This is a fixed blade knife that the blade measures 2.5 inches wide. Overall length is 6.5 inches. It comes with a kydex sheath and a chain to put this knife on. There is a large lanyard hold on the end of the handle.

You are looking at this the Cold Steel 80PGTK GI Tanto knife. Tough on the inside and with a non-nonsense approach to knife usage, this is one knife you can wholly depend upon at your side. With its tough Tanto blade you can thrust and push the blade as hard as you want and it will never let you down.

If you loved the Cold Steel 39FK, you are going to love the Cold Steel Double Agent I serrated 39FKS. This knife has all the same amazing qualities as its plain edged brother, except the blade is serrated.

Cold Steel 97MKM MAGNUM KUKRI W/SHEATH. Comes enclosed in black sheath.

Cold Steel 95BBUSK BUSHMAN BOWIE BLADE. Black handle. Blade measures 7 inches. Enclosed in hard black sheath.

Cold Steel 95BUSK BUSHMAN/FERROCERIUM FIRE STEE. Black handle. Blade measures 7 inches. Enclosed in hard black sheath.

Cold Steel 53NCT Tanto Spike Knife. Black textured and grooved handle. Tanto blade measures 4 inches. Enclosed in hard black sheath. Bead necklace included.

Cold Steel 53NCC Drop Point Spike Knife. Black textured and grooved handle. Blade measures 4 inches. Enclosed in hard black sheath. Bead necklace included.

Cold Steel 17T Kobun Knife. The Cold Steel Kobun 17T is a fighting knife like no other. The name Kobun in Japanese means soldier, and you can safely say this one will definitely win in a battle.

Cold Steel Big Bore Blowgun Darts CSB625SA. Cold Steel has made a .625 Magnum Stun Dart in a pack of 50 pieces. All hand crafted and all with superior accuracy! The black dart is 2.25 inches long and the orange tip is 1 inch long.

Are you are looking for a great hunting knife that is good value for money? The Cold Steel Penndleton Lite Hunter 20SPH is the perfect choice for you.

Cold Steel 20PH OUTDOORSMAN LITE. Black textured handle. Blade measures 5.75 inches. Comes with black sheath.

Cold Steel bring you this 80TFTC True Flight Thrower, with sheath. The ultimate in mean machine throwing knives. You get the distinctive Paracord wrap to the handle to ensure the highest level of grip is there right up until the moment it leaves your hand, giving you pinpoint accuracy.

Cold Steel Frontier Hawk CS90FH. The Cold Steel Frontier Hawk 90FH was a popular choice in the French and Indian wars to the Settling of the West. It has an overall length of 22 inches. The steel is Drop Forged 1055 Carbon and the handle is made of American hickory.

Cold Steel 97BAM18S BARONG MACHETE. Hard black handle. Comes enclosed in black sheath.

Cold Steel axe gang hatchet 90AXG. This axe does not only have a sharp blade but the handle is an American hickory handle! The blade alone is 4 inches with a handle of 18 inches long!

Cold Steel Gladius Trainer CS92BKGM. This Gladius Trainer sword measures 31 inches overall, with a 22 inch blade. One piece black polypropylene construction. It is unsharpened, stiff, and cut resistant.

Cold Steel Kopis Machete 97KPM18S. Classic design. Full tang construction. Carbon steel blade with black baked on finish. Black sheath included. Secure handle.

This Cold Steel CS88CLMS Colichemarde Sword is a sword made to extremely high specifications. Cold Steel have a strong reputation for impressive feats when it comes to steel in knives and swords and this one will leave you wanting to know more.

Here is the Cold Steel frontier pipe hawk, model number CS90PHH. For many people, there were a few disadvantages of traditional pipe hawks, namely the hollow bowl and the drilled out hollow wooden smoking handle.

Cold Steel Trench Hawk 90PTH. Solid black. Axe comes enclosed in hard black sheath.

Cold Steel Rubber Leatherneck. 12 overall. 7" blade. All black Santoprene construction. The SF has been carefully fashioned to look as realistic as possible so it can be effectively used in solo practice, training drills, disarm drills, demonstrations and any other activity where you want a reasonably close approximation of realism but not the extreme danger and risk associated with an actual knife. The Santoprene rubber blade is soft enough to prevent the likelihood of most bodily injury. It does however, have a level of firmness that might cause injury to the face or the eyes, so it is recommended that appropriate eye protection or a fencing mask is utilized at all times when using a Cold Steel® rubber training knife."

If you are a blowgun owner then you will be interested in these CSB625SE Cold Steel pack of 100 blow darts and 7 driving cones. For the experienced blow gun users, these blow darts exhibit all of the same high quality features that Cold Steel are well known for.

Cold Steel Master Bowie. San Mai Trail. 14 1/2 inches overall. 9 1/2 inches VG-1 San Mai III steel bowie blade. Black checkered Kraton handle with stainless guard and lanyard hole. Heavy black cordura belt sheath.

Cold Steel Kobun. 9 3/4 overall. 5 3/8" AUS-8A stainless tanto blade. Black checkered Kraton handle. Lanyard hole. Black Secure-Ex sheath with belt/pocket clip."

Cold Steel Bird and Trout. 6 1/4 overall. 2 1/8" blade. One piece AUS-6A stainless construction with a bead blast finish. Black Concealex neck sheath."

Cold Steel Canadian Belt Knife Contemporary version of a 1950's Classic. 8 1/2 overall. 4" 4116 Krupp stainless hollow ground blade. Black polypropylene handle with lanyard hole. Black cordura belt sheath. May also be worn as a neck knife."

Cold Steel 20LT Tuff Lite. Hard plastic handle. Round hole plain edge blade measuring 2.25 inches. Framelock style closing. Pocketclip on back. Ring hole on handle.

Cold Steel 20LTS Tuff Lite. Hard plastic handle. Round hole serrated blade measuring 2.25 inches. Framelock style closing. Pocketclip on back. Ring hole on handle.

Cold Steel Finn Bear. 8 1/2 overall. 4" 4116 Krupp stainless hollow ground blade. Black polypropylene handle. Black cordura belt sheath. May also be worn as a neck knife."

Cold Steel Roach Belly. Contemporary version of a knife popular in the 17th century. 8 1/2 overall. 4 1/2" 4116 Krupp stainless hollow ground blade. Black polypropylene handle with lanyard hole. Black cordura belt sheath. May also be worn as a neck knife."

Cold Steel Pendleton Lite Hunter. 8 3/8 overall. 3 1/2" 4116 Krupp stainless drop point blade. Black polypropylene handles. Lanyard hole. Black cordura belt sheath."

Cold Steel Ti-Lite Zytel. 5 closed linerlock. 440A stainless sub zero quenched steel blade with false edge thumb stud. Black Zytel handles with stainless pocket clip."

Cold Steel 6 Zytel Ti-Lite CS26SXP. Here is a knife you can truly count on. It measures 7.125 inches closed and features a AUS-8A stainless steel blade with thumb stud. It has black Zytel handles with stainless pocket clip. This is your new favorite knife, get it now!

Cold Steel Master Hunter. Stainless. 9 1/4 overall. 4 1/2" drop point VG-1 San Mai III stainless blade. Black checkered Kraton handle with lanyard hole. Concealex Kydex belt sheath. Made in Japan."

Cold Steel Double Agent I. 7 1/2 overall. 3 1/4" AUS-8A stainless Karambit blade. Full tang construction with two finger holes. Black Grivory handle grips. Molded black Secure-Ex® sheath. Includes neck chain."

Cold Steel Double Agent I. 7 1/2 overall. 3" AUS-8A stainless serrated Karambit blade. One piece stainless construction with Grivory Grip onlays and double ring handle. Lanyard slot. Black Secure-Ex neck sheath with chain."

Cold Steel Double Agent II. 7 1/2 overall. 3 1/4" AUS-8A stainless clip blade. Full tang construction with two finger holes. Black Grivory handle grips. Molded black Secure-Ex® sheath. Includes neck chain."

Cold Steel Double Agent II. 7 3/4 overall. 3 1/2" AUS-8A stainless partially serrated clip blade. Full tang construction with two finger holes. Black Grivory handle grip. Molded black Secure-Ex sheath. Black finish beaded neck chain."

Cold Steel OSS SubHilt Fighter 13 3/8 overall.8 1/4" sub zero quyenched 4116 Krupp stainless blade.Checkered black Kraton handle with injection molded guard and sub-hilt.Lanyard hole.Black Secure-Ex sheath."

Cold Steel OSI. 13 3/8 overall. 8 1/8" AUS-8A stainless blade. Checkered black rubber handle with integrated guard and subhilt. Lanyard hole. Black Secure-Ex sheath."

Cold Steel Super Edge. 4 1/4 overall small fixed blade utility knife. 2" AUS-8A stainless serrated blade. Black Kraton handle. Secure-Ex sheath with keyring."

Cold Steel Urban Pal. 3 1/8 overall T handle push knife. 1 1/2" 420 stainless serrated blade. Black Kraton handle. Secure-Ex sheath with keyring.

Cold Steel GI Tanto. 12 overall. 7 3/8" black finish 1055 carbon steel tanto blade. Full tang. Black polypropylene handles with lanyard hole. Black heavy cordura belt sheath."

Cold Steel Thrower. Perfect Balance. 13 1/2 overall. 9" blade. One piece black finish 1055 carbon steel construction. Black composite onlay handles. Sheath available separately."

Cold Steel Thrower. Sure Balance. 13 1/4 overall. 9" 1055 carbon steel blade. One piece construction with a black weather resistant finish. Lanyard hole."

Cold Steel Chisa Katana. Practical chisa katana. 36 overall. 23 3/8" sharpened 1055 carbon steel blade with blood groove. Genuine rayskin handle with black cord wrap. Black finish iron tsuba and pommel. Black lacquer finish wooden scabbard."

Cold Steel Butterfly Swords. Contains two 20 3/8 overall swords with 14 7/8" 1055 carbon steel blades. Hardwood handle with braided cord wrap. Brass finish D-shaped hand guard. Both store in leather scabbard."

From one of the best companies in the world, this is the Cold Steel 88BK Katana. Part of their warrior series this is one of the most potent weapons we have ever featured here at hand-tools. The ultimate warrior needs the ultimate weapon. This is that weapon.

Cold Steel Nodachi. Warrior Series. 57 overall. 34" blade. For the strong enough to wield it, the Nodachi serves as a sword, halberd, and spear all rolled into one. Sharpened 1055 carbon steel blade with blood groove. Genuine rayskin handle with black cord wrap. Tsuba and pommel are crafted of black iron. Brass collar. Wood scabbard with black lacquered finish and cloth storage sleeve."

Cold Steel O Katana. Warrior Series. 48 1/2 overall. 34 5/8" sharpened 1055 carbon steel blade with blood groove. Genuine rayskin handle with black cord wrap. Tsuba and pommel are crafted of black iron. Brass collar. Wood scabbard with black lacquered finish and cloth storage sleeve."

Cold Steel O Tanto. Warrior Series. 19 1/8 overall. 12" blade. Features a sharpened 1055 carbon steel blade with blood groove. Genuine rayskin handle with black cord wrap. Tsuba and pommel are crafted of black iron. Brass collar. Wood scabbard with black lacquered finish and cloth storage sleeve."

Cold Steel Chinese War Sword. 37 1/2 overall. 23 1/8" sharpened 1055 carbon steel blade with blood groove. Black cord wrapped handle with black coated steel guard and ring pommel. Brown leather scabbard."

Cold Steel Double Edge Katana. 35 1/2 overall. 24" double edged blade. Sharpened mirror polished 1055 carbon steel blade with blood groove. Genuine rayskin handle with black cord wrap. Tsuba and pommel are crafted of black iron. Brass collar. Wood scabbard with black lacquered finish and blue cloth storage sleeve."

Cold Steel Dragonfly Katana. 41 1/2 overall. 29 1/2" sharpened 1050 carbon steel blade with iris leaf point. Black rayskin handle with teal green silk cord wrap. Black iron tsuba with a dragonfly motif. Black lacquer finish wood scabbard. Comes with two protective bags, blue cloth and heavy silk metallic brocade."

Cold Steel Dragonfly Wakizashi 30 3/8 overall. 22" sharpened 1050 carbon steel blade with iris leaf point. Black rayskin handle with teal green silk cord wrap. Black iron tsuba with a dragonfly motif. Black lacquer finish wood scabbard. Comes with two protective bags, blue cloth and heavy silk metallic brocade."

Cold Steel Gim Sword. 37 1/4 overall. 30" sharpened 1055 carbon steel blade. Rosewood handle with sculpted brass guard and pommel. Rosewood scabbard with brass tip and throat."

Cold Steel Grosse Messer. 42 1/4 overall. 32" 1055 carbon steel hand forged blade. Blued steel guard and pommel. Rosewood handles. Full tang. Leather covered wood scabbard with blued steel tip and throat."

You are looking at 41 ½ inches of prime Cold Steel U.S. Cavalry 1860 Saber. This is the Cold Steel CS88HCS. A fantastic reproduction interpretation of the original 1860 model popularized and used during the American Civil War.

Cold Steel Hand-and-a-Half Sword. 42 3/8 overall. 38" sharpened 1055 carbon steel blade with blood groove. Black leather handle with nickel silver guard and scent stopper pommel. Black leather scabbard with nickel silver fittings."

Cold Steel Hand and a Half Dagger. 19 3/4 overall. 13 1/8" 1055 carbon steel double edge dagger blade. Black leather wrapped handle with nickel silver guard and scent stopper pommel. Wood scabbard with black leather wrap and nickel silver fittings."

Cold Steel Katana. Imperial Series. 40 3/4 overall. 28 1/2" blade. This high quality sword features a sharpened mirror polished 1055 carbon steel blade with blood groove and polished finish. Genuine rayskin handle with black cord wrap. Tsuba and pommel are crafted of black iron. Brass collar. Wood scabbard with black lacquered finish and blue cloth storage sleeve."

Here is the Cold Steel 88NS (CS88NS). The 1830 Napoleon Saber measuring a mighty 39 inches overall length. This is the real deal and worth every last cent. Widely used during Napoloeon's epic battles, this popular design remained in use long after it's initial inception.

Cold Steel 1796 Cavalry Saber. Light. 37 3/4 overall. 33" sharpened 1055 carbon steel blade with wide fuller. Black leather wrapped handle with steel handguard and pommel. Wood and leather scabbard."

This is the Cold Steel CS88SB Scottish broad sword. Unbelievably well made to very high specifications. This is going to impress you more than you can imagine. It's a sword that truly commands respect, no matter what your level of experience is. Please take a closer look.

Cold Steel Sword Cane. Heavy Duty. 38 5/8 overall. 24 1/4" 1055 carbon steel blade that is 5.5mm thick, sturdy enough for both cutting and thrusting with one long cutting ege. Black 2mm thick aluminum shaft. Black, extra strong, partial crook handle made from Grivory. Rubber ferule for traction."

You are looking at the Scottish Dirk dagger from Cold Steel. This is the CS88SD and offers you their modern interpretation on a classic time served design that was highly popular in years gone by. In recent years this knife became known more as a display knife so Cold Steel decided to do something about this and bring back major interest in this classic design – and why not?

Cold Steel Small Sword. 37 7/8 overall. 30 3/4" 1055 carbon steel triangular shaped blade. Wire wrapped handle with a light, but strong knuckle guard. The hilt features two shells with functional finger loops. Leather scabbard with an intricately decorated throat and chape."

Cold Steel 1796 Light Cavalry Saber. 37 3/8 overall. Sharpened 32 1/2" 1050 high carbon steel blade with fuller. Black composition handle with steel hand guard. All steel scabbard."

Cold Steel Shamshir Sword. 36 1/4 overall. 30 1/2" sharpened 1055 carbon steel blade with a hard spring temper that will pass the British Proof Test. Imitation horn handle with brass guard. Double ringed leather scabbard with brass throat and chape."

Cold Steel O Tanto. 19 3/8 overall. 12" blade. Sharpened mirror polished 1055 carbon steel blade with blood groove. Genuine rayskin handle with black cord wrap. Tsuba and pommel are crafted of black iron. Brass collar. Wood scabbard with black lacquered finish and blue cloth storage sleeve."

Cold Steel Viking Sword. 37 1/2 overall. 30 3/8" sharpened 1055 carbon steel blade. Black leather handle with sculpted nickel silver guard and pommel. Black leather scabbard with nickel silver fittings."

Cold Steel Wakazashi. 27 3/4 overall. 20 1/4" blade. Sharpened mirror polished 1055 carbon steel blade with blood groove. Genuine rayskin handle with black cord wrap. Tsuba and pommel are crafted of black iron. Brass collar. Wood scabbard with black lacquered finish and blue cloth storage sleeve."

Cold Steel Great Sword. Two Handed. 55 1/2 overall. 32" 1055 carbon steel blade. Not sharpened. Black leather handle with nickel silver guard and scent stopper pommel. Black leather wrapped scabbard."

Cold Steel Frontier Hawk New Version

Cold Steel Norse Hawk. 22 overall. Black coated axe head with 4 3/4" cutting edge. Hickory handle."

Cold Steel Riflemans Hawk. 19 overall. Black coated axe head with 3 1/2" cutting edge. Hickory handle."

Cold Steel Spike Hawk. 22 1/8 overall. 9" black finish, drop forged 1055 carbon steel hawk with 3 1/4" cutting edge and spike. Natural finish American hickory handle. Bulk packed."

Cold Steel Trail Boss. 27" overall. 6 1/2" 1055 high carbon steel axe head with 4 1/2" cutting edge. Genuine hickory handle. Weighs 41 1/2 oz. Light and compact, yet extremely tough. Extensively field tested. Bulk packed."

You are looking at the Trail Hawk, model number CS90TH from the Cold Steel knives company. This is a really well made Tomahawk that comes with the Cold Steel strength of character and level of craftsmanship.

Cold Steel Escrima Stick. 32 1/2 overall. 1 1/8' diameter. Injection molded black polypropylene construction. Similar in size, shape and weight of a traditional rattan stick."

Cold Steel Koga SD1. Self defense tool. 7 1/4 overall. Black reinforced nylon construction. Weighs only 4.1 oz. Hang packaged."

Cold Steel Mini Koga SD2. Self defense tool. 6 3/8 overall. Black reinforced nylon construction. Weighs only 2.1 oz. Hang packaged."

Cold Steel Walking Stick. Irish Blackthorn. 37 1/2 overall. Black polypropylene construction with faux wood handle."

Cold Steel Pocket Shark -Permanent Marker/Self Defense Tool. 6 5/8 overall. Black Grivory construction with pocket clip. Walls are four times thicker than similar markers for greater impact in a self-defense emergency. Easily clips to a purse, pack or brief case. Hang packaged."

Cold Steel Walking Stick. African. 36 1/2 overall. Constructed of solid black polypropylene. Based on the Zulu Kerrie, this walking stick has an undulating shaft and a geodesic knob. Bulk packed."

Cold Steel Training Dagger. 19 3/4 overall. 13" blade with fuller. Black polypropylene construction."

Cold Steel Training Sword. Hand and a Half. 44 overall. 34" blade with fuller. Black polypropylene construction."

Cold Steel Training Sword. Medieval. 39 1/4 overall. 31 7/8" blade with fuller. Black polypropylene construction with removable guard and circle pattern pommel. 1" thick. Bulk packed."

Cold Steel Brooklyn Smasher. 34 overall. Made from black heavy grade polyproylene. Weighs 2lbs 7oz."

Cold Steel Brooklyn Crusher. 29 overall. Made from black heavy grade polypropylene. Weighs 2bs 1 oz."

Cold Steel Delta Dart. 8 1/8 overall. 3 1/4" blade. One piece black Zytel construction with lanyard ring. Bulk packed."

Cold Steel FGX Boot Blade I. 9 1/2 overall. 5" blade. Lanyard hole. From the Nightshade Series. Made from Grivory, the latest in fiberglass reinforced plastic. UV and heat stabilized, making them impervious to the elements. Deeply checkered Kraton handles have been molded directly to the tang. Extremely lightweight with an all black finish. Hang packaged."

Cold Steel FGX Boot Blade II. 6 3/4 overall. 3 1/4" blade. Lanyard hole. From the Nightshade Series. Made from Grivory, the latest in fiberglass reinforced plastic. UV and heat stabilized, making them impervious to the elements. Deeply checkered Kraton handles have been molded directly to the tang. Extremely lightweight with an all black finish. Hang packaged."

Cold Steel FGX CAT Tanto. 11 1/2 overall. 6" tanto blade. Lanyard hole. From the Nightshade Series. Made from Grivory, the latest in fiberglass reinforced plastic. UV and heat stabilized, making them impervious to the elements. Deeply checkered Kraton handles have been molded directly to the tang. Extremely lightweight with an all black finish. Hang packaged."

Cold Steel FGX Jungle Dart. 8 1/4 overall. 3 3/4" blade. Lanyard hole. From the Nightshade Series. Made from Grivory, the latest in fiberglass reinforced plastic. UV and heat stabilized, making them impervious to the elements. Extremely lightweight with an all black finish. Hang packaged."

Cold Steel FGX Karambit. 8 3/4 overall. 4" blade. Finger groove handle with finger ring pommel. From the Nightshade Series. Made from Grivory, the latest in fiberglass reinforced plastic. UV and heat stabilized, making them impervious to the elements. Deeply checkered Kraton handles have been molded directly to the tang. Extremely lightweight with an all black finish. Hang packaged."

Cold Steel FGX Push Blade I. 6 1/2 overall. 4" blade. Lanyard hole. From the Nightshade Series. Made from Grivory, the latest in fiberglass reinforced plastic. UV and heat stabilized, making them impervious to the elements. Deeply checkered Kraton handles have been molded directly to the tang. Extremely lightweight with an all black finish. Hang packaged."

Cold Steel FGX Push Blade II. 5 overall. 2 1/2" blade. Lanyard hole. From the Nightshade Series. Made from Grivory, the latest in fiberglass reinforced plastic. UV and heat stabilized, making them impervious to the elements. Deeply checkered Kraton handles have been molded directly to the tang. Extremely lightweight with an all black finish. Hang packaged."

Cold Steel FGX Skean Dhu. 7 3/4 overall. 4" serrated blade. Lanyard hole. From the Nightshade Series. Made from Grivory, the latest in fiberglass reinforced plastic. UV and heat stabilized, making them impervious to the elements. Deeply checkered Kraton handles have been molded directly to the tang. Extremely lightweight with an all black finish. Hang packaged."

Cold Steel FGX Tai Pan. 13 overall. 7 1/2" double edge blade. Lanyard hole. From the Nightshade Series. Made from Grivory, the latest in fiberglass reinforced plastic. UV and heat stabilized, making them impervious to the elements. Deeply checkered Kraton handles have been molded directly to the tang. Extremely lightweight with an all black finish. Hang packaged."

Cold Steel Honey Comb. Looks like a normal hair brush.Hidden inside is a highly effective stletto dagger with 3 1/2 cruciform shape blade.Precision made of 43% fiberglass reinforced Zytel.Hang packaged."

Cold Steel Indian War Club. 24 overall. Unbreakable injection molded black Polypropylene shaft. 3 1/4" diameter ball. Fitted with a removable blunt, short steel spike. For historical re-enactors the surface has a realistic wood grain finish that can be easily customized with paint and can be ornamented with brass studs, tacks or feathers."

Cold Steel Gunstock War Club. 29 1/2 overall. 3" 1055 carbon steel blade with black oxide coating. Unbreakable injection molded black polpropylene shaft. For historical re-enactors the surface has a realistic wood grain finish that can be easily customized with paint and can be ornamented with brass studs, tacks or feathers."

Cold Steel Training Knife. 11 7/8 overall. 6 3/8" blade. One piece rubber construction. Bulk packed."

Cold Steel Recon Training Knife. Tanto Rubber. 11 5/8 overall. 6 3/4" blade. Black Santoprene construction. Lanyard hole."

Cold Steel Black Bear Classic. 13 1/8 overall. 8 1/8" blade. One piece rubber construction. Used as a training tool. Bulk packed."

Cold Steel Military Classic Trainer. 11 1/2 overall. 6 3/4" blade. Black Santoprene construction. Lanyard hole. Bulk packed."

Cold Steel Shovel. Special Forces. 20 1/2 overall length. Wood handle with black coated medium carbon steel shovel.

Cold Steel Pocket Bushman. 5 3/4 closed. Krupp 4116 stainless blade with thumb studs. Ram Safe lock features a unique, self adjusting ram that moves forward as the knife is opened and wedges itself tightly between the tang cut away called the "shelf" and the "U" shaped "roof" of the handle. 420 stainless handles with bead blast finish feature the mono block construction method famously used in the French Douk line of knives. Designed by Andrew Demko."

Cold Steel Black Sjambok. 54 overall. Black Kraton handle that resembles braided leather with an extruded plastic lash. 25% heavier than earlier models."

Cold Steel Black Sjambok. 42 overall. Black Kraton handle that resembles braided leather with an extruded plastic lash. 25% heavier than earlier models."

Cold Steel Kukri Machete. 18 overall. 13" black finish 1055 carbon steel blade. Black textured PVC handle with lanyard hole. Cordura belt sheath. Hang packaged."

Cold Steel Magnum Kukri Machete. 22 overall. 17" 1055 carbon steel blade with black finish. Blade has been treated with a special anti-rust solution. Black textured PVC handle. Black cordura sheath. Bulk packed."

Cold Steel Big Bore Darts. Bamboo darts. 50 pack. Bamboo shaft. Hang packaged.

Cold Steel Broadhead Darts. Big Bore Magnum Razor Tip. Each dart measures approximately 5 overall. Package of 40."

Cold Steel Blowgun Extension. Big Bore Blowgun Extension. 2' black aluminum tube. Will fit either the 4' or 5' models. Hang packaged.

Cold Steel Big Bore Darts. Mini Broad Head darts. 50 pack. Metal shaft. Hang packaged.

Cold Steel Quiver Guard. For Professional Series Blowgun

Cold Steel Quiver Guard For Professional Series Blowgun

Cold Steel Big Bore Guard. Blowgun Quiver guard. Pack of two. Black plastic construction. Hang packaged.

Cold Steel Quiver Guard. Slips over blowgun tube to keep your hand from sliding into the tips of the darts. The foam insert allows for the darts to rest tightly without damaging to points.

Cold Steel .625 Magnum Stun Dart. 50 pack. Two piece composition construction including orange cone and black dart. Some assembly required.

Cold Steel Solid Proof Promotional DVD. All new graphic demonstrations of strength, sharpness and cutting power. Plus torture testing that will blow you away. Includes bonus DVD Sword Proof. You must request your free DVD. Free with the purchase of any Cold Steel product valued at $22.50 or more.

Cold Steel Perfect Balance Thrower Sheath. Heavy black nylon construction. Made to fit CS80TPB Perfect Balance Thrower or other similar fixed blade knives with up to 9 blade. Bulk packed."

Cold Steel Pro Balance Thrower Sheath. Heavy black nylon construction. Made in fit CS80TRB Pro Balance Thrower or other similar double edge daggers with up to 9 blade. Bulk packed."

Cold Steel Sure Balance Thrower Sheath. Heavy black nylon construction. Made to fit CS80TSB Sure Balance Thrower of other similar double edge daggers with up to 9 blade. Bulk packed."

Cold Steel Shovel Sheath. Black heavy cordura sheath made to fit the CS-92SF Special Forces Shovel. Bulk packed.

Cold Steel Machete Sheath. Latin Machete Sheath. Made to fit CS07AM18 Latin Style Machete, or will fit similar machetes with 18 blade. Black cordura nylon construction featuring taped and riveted seams, slotted back, double retaining straps, safety toe and generous sized belt loop that will even accommodate a G.I. pistol belt. Bulk packed."

Cold Steel 21 Latin Machete Sheath. Made to fit CS97AM21. Black cordura nylon featuring taped and riveted seams, slotted back, double retaining straps, safety toe and a generous sized belt loop that will even accommodate a G.I. pistol belt. Bulk packed."

Cold Steel Delta Dart Sheath. Black Concealex construction with neck chain. Hang packaged. Sheath only, Dart sold separately.

If you own a Cold Steel Latin Machete SC97AM24, then it makes perfect sense to ensure it stays safely protected with the purchase of a replacement sheath.

Cold Steel SC97LPM PANGA MACHETE SHEATH. Black sheath. 4 inches wide and 22 inches long.

Cold Steel SC80TBBA PERFECT BALANCE SHEATH. Black sheath. 14 inches long and 3.13 inches wide.

Cold Steel B625PQ QUIVER FOR PROFESSIONAL .625

Cold Steel Garden and Camp Machete CS97GS. This has a black long blade, the blade is 27 inches long and a black handle of 6.25 inches long! The width of the blade is 1.25.

Cold Steel Garden and Camp Machete CS97GS. This has a black long blade, the blade is 27 inches long and a black handle of 6.25 inches long! The width of the blade is 1.25.

Cold Steel ASSEGAI WITH SHORT SHAFT CS95FS. Cold steel has made a wooden stick that is 26.5 inches long and the metal spear end is 18.25 inches long, so overall length is 44.75 inches. This willl come with a black kydex sheath that closes with two snaps.

Here you are looking at the Cold Steel pocket Bushman knife, model number 95FB. It is a folding pocket knife that we feel has the strength and rigidity that is close to a fixed blade. The blade is made from 4116 Krupp stainless steel for incredible strength and his homes to a clip point style blade that allows for versatility and all-round usefulness.

Cold Steel Black Embroidered Cap 94HCSK. This is a black hat that has the Cold Steel logo letters in a blue and silver color. On the back of the hat it has the words Cold Steel Knives embroidered in a silver gray color. Cold Steel fans will proudly wear this cap.

The Cold Steel CS92FTP FGX knife has an air of mystery about it. The Nightshade knife is so light, it's weight is only 3.7oz, so therefore you can attach this on yourself and it will not cause any discomfort. It is immune to heat, cold and moisture and any other severe weather conditions you can think of.

The Cold Steel CS92FSD is so lightweight is can be hidden just about anywhere on you. This knife does not mind what the weather is as it works very well in any condition.

This is the Cold Steel Karambit 92FK. Deadly, use with extreme caution. Totally undetectable. Part of the new lightshade series, the Karambit 92FK has a 4 inch blade made from Grivory – a new composite made from super tough Zytel, the latest innovation in fiberglass reinfoced thermoplastic.

Cold Steel FGX Jungle Dart CS92FJD . This is the exciting Jungle Dart, by Cold Steel. It is uniquely designed to withstand all elements, so it can be concealed anywhere! The blade is 3.75 inches long, with an overall length of 8.125 inches.

This is the all Black boot blade I by Cold Steel, the 92FBA. It's all part of the new range of knives and tools coming out of the Cold Steel company, the nightshade series.

Cold Steel FGX Cat Tanto CS92FCAT. Here we have the all new, pure Black Cold Steel FGX Cat Tanto Blade 92FCAT. Considered a hidden weapon by Samurai warriors, these single edged weapons were popularized through their simple effectiveness.

Case Brooklyn Whopper CS92BSL. Are you looking to hit one out of the park with this Brooklyn Whopper baseball bat?? Having this would call for the perfect collection. The total lenth is 37.5 inches and is about 2.5 inches thick! You will for sure score a homerun with this bat.

Cold Steel Gladius Trainer CS92BKGM. This Gladius Trainer sword measures 31 inches overall, with a 22 inch blade. One piece black polypropylene construction. It is unsharpened, stiff, and cut resistant.

When you've got to practice, you've got to practice and you have to shed some sweat. Cold Steel developed this, the 92BKD training dagger to help people practice their weaponry and fighting skills over and over.

The Cold Steel Koga SD1 model number 91K. With roots in Japanese inspiration, those who do, have. Koga's are instruments of art and submission weapons of choice for many. Often used in Ninjitsu, famed by many Ninja movies, fans will instantly understand the connection.

The Cold Steel Rifleman's Hawk 90RH. A truly classic example of early American designed axes and cutting tools

Cold Steel Axe Gang Hatchet CS90AXG. Cold Steel wooden handle and black axe. Ready to swing into action. Handle is 18 inches long.

Coming from the original manufacturers, the Cold Steel Wakazashi 88W sword is an impeccable work of art. This smaller sized sword gives increased manoeuvrability and precision when it really matters. Weighing in at 24.7oz this perfect companion can fulfil many of your requirements.

The Cold Steel O Tanto (Imperial Series) 88T comes with a 29” Tanto blade that is made from 1050 carbon steel. It is then heat treated, tempered and then polished giving a classy and elegant look to it.

Cold Steel Quick Draw Sword Cane 88SCFE. This Cold Steel item might come in handy one day as it can be used as a cane but quicky transforms to a sword. It is very easy to use and light weight to carry. The cane is 38 inches and black!

Cold Steel Aluminum Head Sword Cane CS88SCFA. This is an elegant weapon that can be ready for action in an instant. It has a removable 6160 Aluminum head and features an almost unbreakable fiberglass carbon fiber composite shaft. The overall length is 37.625 inches.

The Cold Steel Company has so much acclaim that any people currently try to imitate their brand of products - this is true testament to well-manufactured products! This particular sword, the Cold Steel Katana 88K is part of the company's Imperial Series. The factory uses only traditional materials for their sword fittings. The 88K has a blade measuring over 29 inches long with an overall length of just over 40 inches.

Cold Steel Hand And A Half Dagger CS88HNHD. This is a sturdy dagger featuring a blade of 13 inches, and an overall length of 19.25 inches. It is identical to its companion, the Hand And A Half Sword, just scaled down in size!

This is the Cold Steel GIM Sword 88G. In China they have two types of straight bladed swords. Cold Steel decided to create their own and that is how the Gim was created.

From Japanese inspiration, comes the Cold Steel 88DW Dragonfly Wakazashi which provides the classic inspiration for anybody interested in swords. This sword, measuring just over 30 inches, with a 22 inch sharpened steel blade (made from 1050 grade carbon steel) finishes in the iris leaf point, which makes it ideal for cutting and slashing.

A Cold Steel blade represents a unique, quality product that any owner would be proud to show off or to quietly smile about. Knowing you have got the best can mean a lot. The Cold Steel 88DK Dragonfly Katana is yet another fantastically made sword. With a black lacquered wood handle, 29.5 inch blade and an overall length of 41.5 inches, it is clearly obvious to others when they see what you have got.

Cold Steel Heavy Sure Strike 3 Pack CS80SSA3Z. Sure Strike is Cold Steel's interpretation of the classic Shuriken throwing star and conists of a well-balanced piece of flattened steel with 3 or more points. They are treated with a black epoxy finish for protection.

Cold Steel SR1 Tanto Point CS62LA. The SR1 by Cold Steel is designed for strength and durability, no matter the circumstance or environment. It features a tough 4 inch blade made of 5mm thick American CPM-S35VN premium powdered steel and an equally powerful G-10 handle.

Cold Steel SR1 OD GREEN CS62L. Blade length: 4 inches, Overall length: 9 3/8 inches, Steel CPM-S35VN, G-10 scales on handle, Weight: 7 ounces

This is the Super Edge 42SS from Cold Steel. It's a tough little number designed to simply get stuck into work, and boy does it work! Several reviews of this knife from genuine customers online have shown it to be an incredibly sharp low priced knife, true testament to Cold Steel's heritage and brand name.

Cold Steel Master Hunter-Stonewash CS36CB. Here is the new version of the Master Hunter, featuring a classic and fuctional design. You would have to see to believe the razor sharp edge on the extra broad 4.5 inch blade, made of stonewashed American CPM-3V high carbon steel.

Cold Steel Ti Lite CS26SP! This knife has a blade length of 4 iches, the handle is 4.75 inches! This knife has secure grip with its tough Zy-Ex handle and a leaf-spring lock.

Cold Steel Peace Maker II CS20PBL. Peace be with you and with your neighbor. Cold Steel has desinged this knife to bring peace to those who carry, those on the other side- I do feel sorry for you. This is a fixed blade knife that is 5.5 inches long.

This is the Cold Steel 20BTJ Bird And Trout Knife. Just an ingenuous tool which has been used and enjoyed by fishermen for more than 100 years. The all-steel skeletonized construction and finger ring gives the user maximum manouverability during use.

Cold Steel 12DBST SAFE MAKER I. Dagger style handle and blade. Comes enclosed in hard black sheath. Beaded necklace/chain is included. Pocketclip on back of sheath.

Wouldn't you like one of these fine and elegant Sjambok's ? This is the Cold Steel 42 inch 95SMB Sjambok, and despite it's construction it is actually far more deadly, and easier to use than traditional Sjambok's.

Here we have got the large sized 54 inch Sjambok whip from Cold Steel, the 95SLB. So useful, even untrained hands can use it effectively all thanks to it being a modern day version of an old whip.

This is the 92PBH Cold Steel Indian War Club. Ball headed war clubs have a long history, going back as far as the 16th century. Nobody really knows when they were first used, but countless variations were made, due to the fact they were easy to manufacture. Often fitted with a spike, they could mush through anything as easily as hitting a watermelon, rendering them extremely deadly weapons.

This is the 92HC Honey Comb, from Cold Steel. At first glance you might think that Cold Steel have lost sense of their mind creating a hair brush. However you soon realize that the concept actually makes a lot of sense.

Here we have got the Cold Steel FGX Boot Blade II, the 92FBB. It's part of the awesome Nightshade series of knives. Innovation is key here, the blade, and full Tang construction is Grivory. This is a technological advancement which is a fiberglass reinforced plastic, and incredibly, is stronger than even the tough Zytel.

Here we have a super-tough weapon – the Cold Steel Delta Dart 92DD. This delta dart is constructed out of the super-tough Zytel material, which is a 43% glass filled Nylon composite which is the UV and heat stabilized creating a material totally impervious to the elements. No rotting, warping or cracking. Pure strength.

Notably, this is the Brooklyn Crusher 92BSS from the Cold Steel Knife company. Called the Brooklyn Bats Crusher, it's designed to crush the competition.

This is the Cold Steel 91WAS African walking stick. Inspired by the African Zulu tribes who often walk with a 'Knob Kerrie' or walking stick, this stick is bang up to date and made from ultra-modern unbreakable polypropylene.

This is the Cold Steel Mini Koga SD2 model number 91MK. It's a 6.5 inch submissive weapon weighing just 2.1oz. In the right hands it's a brilliant item created through years of development. Made from virtually indestructible Zytel Nylon.

This is the Cold Steel 91E Escrima stick. Escrima refers to a class of Filipino martial arts where stick fighting is commonly taught and used.

Cold Steel Heavy Duty Sword Cane 88SCFD. Don't let the Coldsteel Heavy Duty Sword Cane fool you. Yea it's got good ergonomic support, it's stylish, and even provides better support on icy or rough terrain conditions. But in this age its nice to have a friend that can deliver some whip-ass in case you have to defend yourself. This Coldsteel Sword Cane is that friend that will be standing next to you in good times and bad.

Here is the brilliant 88BN Nodachi from Cold Steel – part of the warrior series of swords. If you've ever wanted a pure and unadulterated fighting sword but didn't want to pay huge prices then this might just be of great interest. The warrior series of swords are just as good as their more expensive Imperial series counterparts, but have decided to avoid a mirror polished finish.

Japanese-style fighting are becoming quite popular. Therefore if you are a big fan of them you are just simply going to love owning the cold steel Katana 88BKW.

Here are a pair of beautiful Butterfly Swords, 88BF, from Cold Steel – pure innovators in knives, swords and more. Butterfly swords became popular after world war II as Kung Fu masters spread their teachings further afield and developed schools outside of China.

Cold Steel Chisa Katana CS88BCK. Here is the 88BCK Chisa Katana, from Cold Steel. It features a 24.5 inch 1055 carbon steel blade and an 11.5 inch Samé (Ray Skin) handle with black braid and brass Menuki. Comes with a black lacquered wood scabbard.

Say no more – this is the deadly Cold Steel Torpedo, model number 80TOR. It's typically thrown by the user, making a great way to practice hitting targets or use for the real thing. It can stop animals up to Coyote size, thanks to it's 2lb weight and smooth surface it slides from your hands with grace and precision.

Cold Steel 6 Zytel Ti-Lite CS26SXP. This knife was designed in collaboration with custom knifemaker Phil Boguszewski. Comes with a 6 Stiletto style blade which is made out of AUS8A stainless steel, and joined together with the drilled Zytel handle which has a stainless steel leaf spring lock

Here is a pack of 40 Cold Steel Razor tipped Broadhead blow darts. One of a number of Cold Steel blow darts to consider. If hunting with darts seems like your sort of thing then choose Cold Steel for their modern interpretation on a timeless hunting tool.

Cold Steel Bokken 92BKKC. Cold Steel Bokken has an all black kydex sheath and handle for this Bokken. The handle is 11.25 inches and the kydex sheath is 30.5 inches long. Sleek and slender, you will like adding this Bokken to your collection.

This is the Cold Steel Irish Blackthorn Walking Stick, model number 91PBS. One of the most finest walking sticks in the world.

The Cold Steel Double Agent II 39FN knife has plenty of tricks up its sleeve that will astound you. Anyone who has ever tried it, has never walked away feeling let down or that it is lacking in something.

If you are looking for a knife that packs a mean punch, the Cold Steel Double Agent I 39FK is the one for you. Features a 3 inch hawkhill blade that is made from AUS8 stainless steel.

The Cold Steel Rubber Training Knife – 92R14BBC is commonly used to train people with until they have experience with the real thing. The way it has been designed it looks and feels just like a real knife.

This is the Cold Steel Rubber Training Recon 92R13RT. It is used in training exercises as it looks and feels exactly the same as the real thing. This will allow you to gain valuable experience and confidence before you handle a proper one.

The Cold Steel rubber trainer peace keeper 92R10D has been designed to be used safely in training practices, training drills, solo practice etc.

The Cold Steel “Hand & A Half” Training Sword – 92BJHNH is the ideal practice/training sword to get you started. Because the real thing is so razor sharp and powerful, if you are not fully experienced you could be in real danger. This is where this handy tool comes in use.

Cold Steel Trail Hawk CS90TH. The Trail Hawk will soon become your best friend. This is a wooden handle axe that is 22 inches long. The axe blade is 2.5 inches wide and 3.75 inches long. The trail hawk will not let you down.

Cold Steel Hand-And-A-Half Sword CS88HNH. This sword represents brute force in an incredible package. It is amazingly fast and weighs in at a very impressive 49 oz. The wide 33.5 in blade can certainly do some damage when requested, yet it is pointed enough for effective attack movements.

If you want to own the ultimate fighting sword, the Cold Steel Wakazashi Warrior 88BWW is the perfect one for you. These types of swords are know to be very expensive, so to save costs, Cold Steel has replaced the expensive mirror polishing for a more affordable one, without harming its image.

Cold Steel O TANTO (WARRIOR SERIES) CS88BT. The Cold Steel O Tanto (Warrior Series) 88BT is very popular and has been designed for its fans making it more affordable in price. To reduce the price the blades do not have the expensive mirror polish any more, as Case have replaced it.

Cold Steel Trench Hawk Trainer Axe CS92BKPTH. This training tool is very similar in the feel and size of the original, but is much safer to train with. The overall length is 19 3/4 inches and features santoprene steel/material.